SlovenianEnglish (UK)
the rock'n roll noisemakers  ::  custom  guitar  pedals

Time Module

JaMit FX Time module Delay


Price: 95€

Oh, so this is just another digital delay pedal …. NOOOOOOOT!!!! Time Module delay is a PT2399 based echo pedal with carefully chosen components and precisely calculated filters to make achieve a great analog-sounding delay effect. One of its best features is the Tape delay emulation – we added a modulation circuit.

Every echo sounds a bit darker than the previous one. At longer delay times the delays get a bit dirtier – that are the analog-sounding features that we’re talking about. The delay time goes somewhere between 0 and 600 ms. A classic slap-back, basic delay and long “U2ish” echo sounds can be achieved easily. Let us introduce you to the MIX control that mixes your delay sound to the clean sound of your guitar. The repeat knob controls the amount of delay repeats. From the middle position upwards the effect starts to oscillate. Turning the controls at this time produces some weird sounds, so give it a go.

About that modulation we were talking about. With the Depth knob you control the amount of modulation that is present in your delay tone. Once the modulation is active, you’ll hear a bit of pitch shifted echoes present in your tone. The Speed knob sets how fast your echoes modulate. The Depth and Speed controls are interactive with Time control. With this delay pedal, there’s also possible to produce a chorus-like sound, an almost realistic bathroom reverb, some vibrato/lesslie tone and of course the ultra weird oscillations followed by a bunch of pitch shifted sounds.

Settings and Controls

TIME: Controls the delay time

REPEATS: The number of repeats

MIX: Mixes the dry and wet signal

DEPTH:  Modulation intensity

SPEED: Modulation speed

MODULATION SPEED: Blinking LED that indicates the modulation speed


  • - Input impedance: 1M Ohm
  • - Max. delay time: 600 ms
  • - True bypass
  • - "Center negative" power supply, 2.1 mm standard connector
  • - Supply voltage: 9 VDC
  • - Current consumption: 100 mA
  • - Size: 120 mm x 95 mm x 34 mm (standard 1590BB enclosure)
  • - - Aluminium faceplates, handmade


More custom options:

If you want a custom designed faceplate (the handmade aluminium plate on top of the effect), we can make it for you as well. The price depends on the faceplate complexity.

Additional payment: from 10-30 €  


Custom Faceplate:

Click-less relay bypass: